Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32
  1. #1
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace DPS (up to 21-Point Cube 9.261 Colors Free Display Check Version)

    Light Illussion's LightSpace DPS (Free Display Check Version of LightSpace CMS) now supports up to 21-Point Cube (9.261 Color Points) Free Display Verification for daily performance test where accurancy is very critical.



    Verification

    LightSpace DPS has one main function - to be used for Display Profiling and Verification, allowing the user to determine if a given display requires re-calibration or not.

    With LightSpace DPS it is possible to use any of LightSpace's profiling capabilities, but without the ability to 'save' any profiles. All checking needs to be performed on the profile before closing the software.

    It is also possible to generate a LUT from the profile, which aids checking the profile information as the 3D cube view and 1D graph LUT will show the necessary corrections required for the display profiled. The LUT can also be 'virtually applied' to the display for re-profiling, howing the effect of the LUT corrections.



    High Accuracy

    Unlike inferior display checking systems, LightSpace CMS is not limited to a small range of colour patches, providing 'Quick Profiling' for daily checking, as well as full cube based profiling, including 21^3 with 9261 individual colour patches (and beyond) for unlimited accuracy when verifying the accuracy of any given display.

    Quick daily verification takes seconds, and ensures no display drift, while full cube based profiling ensure any given display is actually accurate to the required colour space target.



    Simple Confirmation

    Display accuracy is simplicity itself to check, with the closer the cube image is to being a cube, the better the accuracy.

    And being able to rotate the cube in 3D space makes it simple to spot any colours that are inaccurate anywhere in the volumetric colour space.

    All this in addition to standard CIE, DeltaE, gamma graphs, including LightSpace's unique RGB Separation graph.



    RGB Separation

    RGB Separation' is a very quick and simple guide to likely display accuracy.

    If this graph shows errors the display has to be considered inaccurate.

    Free Download Link

    This license will activate the standard LightSpace Demo Download, turning it into the 'free' profiling version. The LightSpace CMS demo program needs to be downloaded separately.

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  2. #2
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 6.6.3.1986 (13 October 2014)

    A new version of LightSpace has just released.

    This version includes:

    -- Auto Close option added after Display Characterization

    -- Lumagen Radiance 21xx 17^3 LUT support added

    -- Additional EIZO integration added

    -- BON display integration added

    -- Additional Arri Look tools added

    -- Support for NEC display calibration integration

    -- Additional LUT formats added

    Download LightSpace CMS Demo or Upgrade for Licensed Users

    Request Free Version License for LightSpace DPS (Display Profiling System)

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  3. #3
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 6.6.4.2004 (10 November 2014)

    A new version of LightSpace has just released.

    This version includes:

    -- Upload thermometer added

    -- Auto Close option added after Display Characterisation

    -- Lumagen 17^3 LUT support added

    -- Additional EIZO integration added

    -- BON display integration added

    -- Additional Arri Look tools added

    -- Support for NEC display calibration integration

    Download LightSpace CMS Demo or Upgrade for Licensed Users

    Request Free Version License for LightSpace DPS (Display Profiling System)

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  4. #4
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 6.6.4.2010 (19 November 2014)

    A new version of LightSpace has just released.

    This version includes:

    -- Save Probe settings between program close/open

    -- Colorimetry Research CR-250 integration added

    Download LightSpace CMS Demo or Upgrade for Licensed Users

    Request Free Version License for LightSpace DPS (Display Profiling System)

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  5. #5
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 6.6.5.2021 (12 January 2015 - Closed Beta)



    A new version of LightSpace has released at closed beta that adds support for the MadVR's Test Pattern Generator that is now controlled by LightSpace. The users can select custom pattern sizes with APL also and feature direct LUT Upload into madVR.

    There more instructions available here: Light Illusion

    Public release will be out very shortly.

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  6. #6
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 6.6.7.2061 (24 March 2015)

    Light Illussion has just released the Next Generation of Color Mathematics for it's advanced Color Engine, which is at the heart of the unparalleled calibration accuracy of LightSpace CMS.

    The original Color Engine had previously proven to be the most accurate, as well as the fastest available for display calibration, LUT generation, LUT conversion and LUT manipulation. However, nothing is ever perfect, and Light Illusion knew they could do better. After over 6 man-months of work the algorithms and mathematics that are at the core of the LightSpace Color Engine have been totally re-written and enhanced, with visible and measurable improvements in final calibration results.

    Note: for users that have performed a recent display profiling, they don't need to re-measure again their displays. It's required only to install the new LightSpace version, load their measurement file and generate the ColorSpace conversion to get the new 3D LUT correction file and then upload it to their 3D LUT hardware device or to their 3D LUT capable monitors. This saves a lot of time.

    Full Release Notes @ available here.

    This version includes:

    -- New Colour Engine mathematics and algorithms

    -- New LUT Format for Canon 4K Professional Displays

    -- Changed operation of VideoScale functions

    -- Changed defaults for Convert Colour Spaces

    -- Added Differential Gamma graph

    -- Added support for DVDO AVLab TPG patch generation

    -- Corrected Active LUT effect on initial patch in Measure mode

    -- Fixed error with Probe Settings not being remembered correctly

    -- Small changes for CR-250 integration

    -- Added error message if CDL/CCC file invalid

    -- Corrected minor Convert Colour Space white loss

    -- Changed UHDTV label to UHD Rec2020

    -- Added ST2084 Gamma profiles for Rec709, Rec2020, and P3

    -- Fixed error with Hubble probe connection

    -- Fixed duplicate LUT being applied to Ref Image when exporting Arri Looks

    Download LightSpace CMS Demo or Upgrade for Licensed Users

    Request Free Version License for LightSpace DPS (Display Profiling System)

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  7. #7
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 7.0.0 is coming….

    For LightSpace users, there some real interesting new features like these ones you can see below:

    Quick Profiling

    Additionally to the Quick Profiling of Primary/Secondary Colors measurements that were available since now, Gamut Saturations @ 75% or 100% Stimulus Level and Memory Colors (Color Checker Classic) options added, to quick overview the performance of any display.



    Here is an example of the CIE chart after the Memory Colors measurement:



    Gamut Triangle Level

    The new Gamut Triangle Level function enables the visualization of a display's gamut at all matched RGB primary points throughout the full stimulus range. By cycling through list of available matched RGB primary points it is possible to see the shape and size of the Gamut, and see at what levels it is smaller or larger that the desired target.



    When you will run a Quick Profiling of Primary Colors which measures 20-Point of Luminance per color channel @ 100% Saturation, you will be able later to check the 100% Saturation of any Luminance level to overview the gamut coverage triangle over these 20-Point Luminance levels to check if the gamut coverage remains the same or if is reduced; to find which pre-calibration settings give the largest coverage etc.

    This is extremely helpful when it comes to understanding the underlying capabilities of a given display.

    Stimulus Levels



    The Stimulus Levels function is another of the 'filters' for the CIE graphs, and defines how the measured points are shown. As with all the points filters they are additive options, and will combine with any other filters selected. The Stimulus Levels filter will show any and all points that include the selected value within any R, G, or B stimulus data. This enables easier selection of a given point to enable it to be isolated via a double click to see the points associated measured color data and Delta-E values.

    Delta-E

    You can display at the CIE Chart only the colorpoints with the selected dE range, to check what areas of the display have more errors.



    The Delta-E filter is also another of the 'filters' for the CIE graphs, and defines how the measured points are shown. As with all the points filters they are additive options, and will combine with any other filters selected. Therefore to see just the points within the available Delta-E ranges first disable all other filter tick boxes. The benefit of this filter function is that it enables a quick assessment of the spread of Delta-E values within the measured profile, allowing a very quick understanding of the overall accuracy of the display.

    Reports

    The new Reporting feature enables a .pdf export of the various graphs, as well as details on various aspects of the selected profile, including Luma range, contrast, Delta-E ranges, etc., as well as user editable sections for client name, display, probe data, and more.

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  8. #8
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 7.0.0.2155 (15 June 2015)

    Light Illusion releases Version 7 LightSpace CMS – a major features update.
    New features include:
    -- Added new Maths functions for LUT Manipulations
    -- Added ‘Sweeps’ to Quick Profiling options
    -- Added memory Colours to Quick Profiling options
    -- Added EBU TEC3320 colour space pre-set
    -- Error message if Colour Space name invalid
    -- Additional CIE graph display filters and features
    -- Export PDF report capability
    -- New LUT formats
    -- BON 1D & 3D LUT Upload
    -- ACES v1 fixes (for ACES not LightSpace)
    -- Correction for madVR integration
    -- Added gamut control for displays with limited gamut
    -- New Manual Measure feedback Zoom graph
    -- New Patch Colour section for Manual Measure
    -- Added new AIO (all-in-one) mode for i1d3 RevB
    Many if these new feature are all-new, and will be built upon in the coming weeks and months, with further updates being released for all LightSpace CMS users.
    As is the case with all LightSpace updates, the new features are free to all users with valid option licenses that include the areas within which the new feature are contained.
    The on-line user guides have been updated to include the new features, and it is recommended that all users refer to these, as some changes alter the previous operation of some LightSpace CMS features and functions.
    Download LightSpace CMS Demo or Upgrade for Licensed Users
    Request Free Version License for LightSpace DPS (Display Profiling System)

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  9. #9
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 7.0.0.2164 (30 June 2015) just released.

    New features

    -- Added Konvision Broadcast Monitors Integration and Direct 3D-LUT Uploading

    -- Added Prisma 3D-LUT Box Integration and Direct 3D-LUT Uploading

    -- Changes of Sliders Link function

    Download LightSpace CMS Demo or Upgrade for Licensed Users

    Request Free Version License for LightSpace DPS (Display Profiling System)

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

  10. #10
    Senior Member ConnecTED's Avatar
    Join Date
    Jun 2014
    Location
    Athens, Greece
    Posts
    225


    LightSpace CMS 7.0.1.2171 (12 July 2015) just released.

    Changes

    -- Changed Colour Space default to Peak Chroma

    -- Fixed Parametric Gamma Save bug

    -- Changed DVDO Baud Rate

    -- Added YC422/YC444 output option for DVDO AVLab Test Pattern Generator

    -- Fixed Active LUT for Manual Measure & Quick Profile

    -- Klein K80 added to Discoverable Probes

    -- Fixed Java App crash with Patch Sliders

    -- Corrected PR-670 Luma level reporting

    Download LightSpace CMS Demo or Upgrade for Licensed Users

    Request Free Version License for LightSpace DPS (Display Profiling System)

    S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
    V/P: eeColor 3D LUT Box - P/G: DVDO AVLab TPG
    Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

Page 1 of 4 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Luxury Publishing Group Inc.
15332 Antioch Street | Pacific Palisades, CA 90272 | 310.860.9988
©2011 Luxury Publishing Group. All Rights Reserved
For our Privacy Poliicy, ad specs and contact
info please click here